Quantcast
Jump to content

How to play custom sound during tuner is running?


Ahmed Mostafa
 Share

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Similar Topics

    • By camomask
      Are Samsung watches not running tizen anymore? I saw that they shifted to Android 
    • By Cartha
      Is there a way to take the application files from the TV and run it on Samsung's Tizen blu-ray player?
      I have a problem with the application from the Samsung Store. Its publisher left version 5 available for my Samsung UBD-M9500 player. This version does not work anymore, but on Samsung TVs it is version 6. The system is the same, so if i had access to the files of this application maybe it could be launched via developer mode on the blu-ray player.
      Does anyone know how it can be done?
    • By 4cr4n1x
      When user selects input, keyboard opens and shifts app almost all the way up. Only 10% of app is visible with keyboard on.
    • By STF News
      The Remote Device Manager provides a mechanism to deploy a project remotely from Tizen Studio to a Tizen-enabled device, such as Galaxy Watch. Tizen-enabled devices can be connected or disconnected through the Remote Device Manager if they are on the same network. Once the connection is made, a device log is shown in the Log View. You can also use the interface of the Remote Device Manager for executing SDB shell commands.
      Prerequisites: Tizen Studio 2.0 or higher
      Launch a project with Remote Device Manager
      Step 1: Disable Bluetooth
      If the watch has not been upgraded and the Tizen version is below 5.0, Bluetooth should be disabled during this process. In upgraded watches, you don’t need to disable Bluetooth.
      Path: Settings > Connections > Bluetooth

      Figure 1: Disabling Bluetooth
      Step 2: Enable debugging mode
      Make sure debugging mode is enabled. You can enable debugging mode from the Settings menu, as shown below.
      Path: Settings > About Watch > Debugging is turned on

      Figure 2: Enabling debugging mode
      Step 3: Set the Wi-Fi to Always on
      This step is optional, but to avoid any unnecessary issues, it is better to set the Wi-Fi to Always on. Leaving the setting on Auto can sometimes create issues.
      Path: Settings > Connections > Wi-Fi > Always on

      Figure 3: Setting the Wi-Fi to Always on
      Caution: Setting the Wi-Fi to Always on can drain the battery drastically. After debugging, it should be set back to Auto again for better battery life. Step 4: Connect to the network
      Connect the watch to the same network as your PC.
      Choose either of the following ways to connect the devices to the same network:
      • By creating a mobile hotspot
      • By using Wi-Fi under the same router
      Step 5: Restart the watch
      After the previous steps have been completed, restart the device. If you do not, the connection setup shows an error.

      Figure 4: Rebooting the watch
      Step 6: Establish the connection from the Remote Device Manager
      In Tizen Studio, go to Launch Remote Device Manager.

      Figure 5: Launching the Remote Device Manager
      Scan for new devices. The window shows a list of available devices and their IP addresses. You can also add a device manually from the Remote Device Manager window.

      Figure 6: Searching for available devices for connection
      To connect to the device, click on the Connect toggle next to the watch IP address and port information. The watch receives an RSA authentication request through a pop-up during this connection setup and it is mandatory to accept the RSA authentication to complete the process.

      Figure 7: Connecting to the watch from the Remote Device Manager
      You are now all set to deploy your app from Tizen Studio to the wearable device.
      Step 7: Permit to install user applications
      As a security feature, the device or emulator you have connected to does not contain the necessary certificates for installing user applications, and you must install them before being able to run your application on it. To do so, select “Permit to install applications” from the context menu of the device in the Device Manager.
      If the “The permit to install application is not required for this device” appears, this step is unnecessary.

      Figure 8: Setting the permit to install applications in the Device Manager
      Step 8: Launch your project
      Now, deploy your project on your connected watch, as shown in the image below.
      Path: Right-Click on the project > Run As > 1 Tizen Native Application

      Figure 9: Deploying the project from Tizen Studio to a connected watch
      Some helpful tips for connecting your device with the Remote Device Manager
      Check the IP address of your watch from Connections > Wi-Fi -> Wi-Fi Networks > tap on the SSID (your Wi-Fi name) > IP address.
      If your device is already shown in the Remote Device Manager's history, delete it and try to connect again.
      Launch the Device Manager to see the Log View.

      Figure 10: The Log View from Device Manager
      Make sure the watch is not connected with any other devices, including a phone. Otherwise, the connection fails and you receive the following error message:

      Figure 11: Error message during multiple connections
      If you cannot find the watch after scanning for devices from the Remote Device Manager, make sure your device is on the same network. To check this, go to the command prompt on your PC and ping the IP address of the watch in the following manner:
      ping < Watch_IP >
      If the ping command fails to connect to the IP address of your watch, it is not on the same network, and the SDB / Remote Device Manager does not work. To fix this, you need to change the network settings of your router or PC. The issue can also be caused by firewall settings, although this is rare.
      Conclusion
      The main purpose of this article is to help new developers to deploy Tizen projects to a real device using the Tizen Remote Device Manager. Hopefully, this tutorial is helpful for beginners and gives them a good experience with Tizen Studio.
      If you have any other problems or queries regarding launching projects with the Remote Device Manager, feel free to reach out through the Samsung Developers Forum.
      View the full blog at its source
    • By STF News
      Looking to show off your design chops? You can now submit your portfolio to Samsung and apply to become a Galaxy Watch face or Galaxy Themes seller. The submission window is open October 14 - October 27.
      Galaxy Watch
      Check out our latest how-to blog and read up on the new process for watch face design reviews. Then head over to the submission page and complete your application.
      Galaxy Themes
      Watch our video for an overview of the process and what you need to prepare. Then download the Themes Submission Starter Kit and let the creative juices flow. Once you've assembled everything, complete your application here.
      While you're working on your portolfio, listen to Tony show Diego how to use Galaxy Themes Studio. It will livestream on Thursday, October 15 at 10am PT and will be available on YouTube for replay.
      Submit Now
      The application process is very selective, and only the best of the best are selected. Think you have what it takes? We can't wait to find out.
      View the full blog at its source
×
×
  • Create New...