Quantcast
Jump to content


Recommended Posts

Posted

Samsung's Galaxy A54 smartphone in Awesome Violet.

Samsung’s Galaxy A smartphone series has been quite popular in recent years. According to some reports, the mid-range phones have sold even better than the Galaxy S models. That’s why you’d have a good reason to look forward to the Galaxy A54 and A34 that Samsung just unveiled. The former is a higher-priced, mid-ranged Samsung phone you should check out. But maybe hold off on buying the Galaxy A54 for a few months until we see Google’s Pixel 7a.

The Galaxy A54 is a good alternative to the Pixel 6a, which usually sells for around $300, much lower than its original $449 retail price. But the Pixel 7a will be even better than last year’s Pixel 6a. And it’ll be the mid-range phone to beat this year. Though in earnest, the Pixel 7a is closer to being a flagship phone than the Galaxy A54.

One of the immediate highlights of the Galaxy A54 and A34 is the design. The mid-range phones look a lot like the Galaxy S23 handsets. Especially when it comes to the rear-facing triple-lens camera setup, but they’re not identical, especially the cheaper A34 model.

When it comes to specs, the Galaxy A54 is the more exciting model of the two. It features a 6.4-inch Full HD hole-punch display with 120Hz refresh rate and 1000 nits brightness, under-display fingerprint sensor, Exynos 1380 processor, 6GB or 8GB of RAM, 128GB or 256GB of storage, and microSD card support.

Samsung's Galaxy A54 smartphone in Awesome Graphite.
Samsung’s Galaxy A54 smartphone in Awesome Graphite. Image source: Samsung

The handset features three cameras on the back, including a 50-megapixel main camera with OIS, a 12-megapixel ultra-wide lens, and a 5-megapixel macro camera. The selfie shooter has a 32-megapixel sensor. Also, the A54 phone features a 5,000 mAh battery that supports 25W wired charging.

One other notable Galaxy A54 feature is the support for four years of Android updates and five years of security updates.

All of that will retail for $449 on April 6th when the Galaxy A54 hits stores in the US. The phone will be available to preorder later this month, on March 30th. This is where I’ll tell you to hold for about a month to see what’s coming at Google’s I/O 2023 event.

Word on the street is that’s where the Pixel 7a and Pixel Fold will be introduced. The former is a direct competitor to the Galaxy A54. And while the new Samsung phone looks like a flagship, the Pixel 7a might actually feel like one.

Pixel 7a prototype from Vietnam: Rear design and camera module.
Pixel 7a prototype from Vietnam: Rear design and camera module. Image source: Zing News

The Pixel 7a appeared in extensive leaks, so we already know what the phone has to offer. We’re looking at a handset that features a glass and metal build. Even the rear panel is made of glass, unlike the Galaxy A54. This gives the Pixel 7a wireless charging powers, something the Samsung handset lacks.

While the Pixel 7a’s 6.1-inch OLED panel doesn’t support 120Hz refresh rates like the Galaxy A54, it’ll still go up to 90Hz. More interestingly, the Pixel 7a will feature the same Google Tensor G2 processor that powers the Pixel 7 and Pixel 7 Pro flagships. That will be a much better choice than Samsung’s Exynos processor.

Other specs include 8GB of RAM, 128GB of storage, and a dual 12-megapixel camera on the back. The camera abilities of the Pixel 7a should exceed the Galaxy A54’s powers. That’s because the Pixel 6a is already a great camera, so the Pixel 7a should build on that.

As for Android updates, the Pixel 7a will get them much faster than the Galaxy A54. Hopefully, Google will match Samsung’s four-year update guarantee.

The Pixel 7a will retail between $400 and $500, like the Galaxy A54. Even if it’s slightly more expensive, the Google phone is the better choice this year. That’s why you’d be better off waiting for Google to unveil the Pixel 7a before your purchase the Galaxy A54. Even if you get the Samsung phone, you might score a better price deal in mid-May than at launch.

The post Don’t buy the Galaxy A54 before the Pixel 7a comes out appeared first on BGR.

View the full article



  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Similar Topics

    • By Alex
      Three weeks ago, the company released in India the Samsung Z1, its first smartphone powered by Tizen, a homegrown alternative to Google Inc.’s Android operating system.
       
      This week, Samsung is pushing the Samsung Z1 into Bangladesh, a neighbor of India with more than 150 million people and a similarly low rate of smartphone penetration.
       
      After several missteps and rethinks, Samsung’s strategy for its Tizen smartphones is taking a clear shape: the company is aiming the fledgling platform squarely at first-time smartphone users, many of whom may not even have a bank account. The Samsung Z1 is selling in India for about $90.
       
      To that end, Samsung has been touting the “lightweight” nature of the Tizen operating system, meaning that it requires relatively little computing power and can handle most tasks without requiring pricey high-end specifications.
       
      That same lightweight approach has also allowed Samsung to use Tizen as the platform for many of the devices it is hoping will populate its “connected home,” from televisions to smart watches and home appliances.
       
      Despite concerns that Samsung’s new smartphone would face stiff competition in India, where several local handset makers are touting low-end smartphones — some of them in partnership with Google — Samsung says that its Tizen smartphones have received “positive responses” there.
       
      Positive enough, it seems, to at least push Tizen into a second country.
       
      Source: http://blogs.wsj.com/digits/2015/02/06/samsung-extends-tizen-smartphone-to-bangladesh/
    • By Samsung Newsroom
      Play Asset Delivery (PAD) enhances the gaming experience by offering the advantages of application bundles, which are packages that group all necessary resources for efficient delivery, making downloads faster and installations smoother for players. Android App Bundles (AAB) are a type of PAD, the modern way of building and publishing Android applications and games in Google Play Store. The Samsung Galaxy Store recently introduced the option to upload AAB files to Galaxy Store Seller Portal. However, AABs have some Google Play Store proprietary features that might make a game non-functional when it is uploaded to Galaxy Store. This article explores ways in which you can utilize PAD while ensuring your game remains compatible with Galaxy Store.
      Purpose
      PAD is a very useful feature that helps reduce the game's initial download size, as it downloads various game assets at runtime. There are multiple ways of using this feature in Unity games. However, certain PAD configurations may cause the game's assets to fail to load when the game is published to Galaxy Store. In this tutorial, you learn how to properly configure PAD and adjust Unity configurations accordingly, so your game can be successfully published to Galaxy Store.
      In the following sections, PAD functionalities are implemented in an existing coin collector game (referenced in the article Integrating Samsung IAP in Your Unity Game), demonstrating how to download and apply a new set of materials for the floor tile at runtime. Here, you also learn about the adjustments that are necessary for successfully publishing a game using PAD to Galaxy Store.
      Prerequisites
      To follow this tutorial, ensure that your setup has the following:
      Unity Game Engine version 2023.2 or above The "Addressables for Android" package for Unity A Google Play developer account A Galaxy Store Seller Portal commercial seller account A game created using Unity where you want to add the PAD features To implement PAD in your Unity game, you can use the "Addressables for Android" package. This is the easiest and most convenient way to implement PAD in a game. This package is only supported on Unity version 2023.2 or above. If your game is built using a previous version of Unity, please migrate your game to the Unity 2023.2 version first.
      PAD implementation considerations
      There are multitude of ways to implement PAD in games built with the Unity engine. However, the most common method for implementing PAD restricts the game to being publishable exclusively on the Google Play Store and does not provide any easy method of disabling PAD for uploading these games into other storefronts. For the best experience with your game, it is recommended to use PAD to bundle all game assets together. This approach ensures that all necessary resources are downloaded right away, preventing any missing assets which could affect the user experience.
      There are three types of asset packs that can be configured while using PAD: "Install Time," "Fast Follow," and "On Demand." Games that use the "Install Time" asset packs can be uploaded to Galaxy Store without any issues as these assets are installed together with the game and do not require any separate downloads. When Galaxy Store generates a universal APK from AAB files, the "Install Time" assets are directly included in the APK.
      Games that are designed to only use "On Demand" or "Fast Follow" asset packs do not allow downloading their assets when they are uploaded to a storefront that is not the Google Play Store. Thus, for any game that uses either the "On Demand" or "Fast Follow" asset pack delivery method, PAD must be disabled in order to upload the game to Galaxy Store.
      To ensure that your game's PAD functionality can be easily switched off and your game is successfully uploaded to Galaxy Store, the "Addressables for Android" package must be used to implement PAD.
      This article assumes that you have implemented PAD in your game using the "Addressables for Android" package and that you have also configured these two assets with the following configurations:
      A "Grass" asset pack set to be downloaded as a "Fast Follow" asset A "Ground" asset pack set to be downloaded as an "On Demand" asset In the next sections, you learn how to integrate PAD into your existing Unity game using the "Addressables for Android" package so that you can easily publish your game to Galaxy Store with minimal changes.
      Basic steps to implement PAD in your Unity game
      In this section, you learn how to configure your assets using PAD functionality that keeps your game compatible with both Google Play and Galaxy Store.
      In Unity, configure "Build Settings" to run the game on Android and generate the AAB: Click File > Build Settings and then select the Android tab. On the "Android" tab, select the Build App Bundle (Google Play) checkbox.



      Figure 1: Enabling the "Build App Bundle" option

      Install the "Addressables for Android" package from the Unity Package Manager. This additionally installs the "Addressables" package as a dependency. Initialize PAD. Go to Window > Asset Management > Addressables and click Init Play Asset Delivery.



      Figure 2: "Init Play Asset Delivery" option

      Configure the "Addressables Groups" for assets: Select Window > Asset Management > Addressables > Groups. Click New > Play Asset Delivery Assets. This creates a new group. Enter a descriptive name. For the purposes of this walkthrough, name one group "Grass" and then create another group and name it "Ground."



      Figure 3: Creating asset groups

      Assign the assets to the Addressables Group: Select the assets you want to assign to an Addressables Group and in the "Inspector" dialog box, tick the Addressable checkbox. The asset is converted into an "Addressable" and assigned to the default Addressables Group.



      Figure 4: Converting assets into Addressables

      Click the folder name in the "Group" field. In the example, the folder name is "Grass."
      Drag and drop the asset from the default group to the group of your choosing. For the purposes of this exercise, assign the grass material related assets to the "Grass" Addressables Group and ground material related assets to the "Ground" Addressables Group.




      Figure 5: Assigning assets to groups

      Configure the "Play Asset Delivery" schema for these addressable groups to add the PAD functionality to your game: Select any of the top-level Asset Group names in the "Addressables Groups" window to open the inspector window for that group. Scroll down in the "Inspector" window until you find the "Play Asset Delivery" schema. From the "Delivery Type" dropdown list, select Install Time, Fast Follow, or On Demand, based on your requirements. There is a demonstration below on how the game might behave on Galaxy Store when you choose the option "On Demand." For more information, see the Testing your PAD Enabled Game on the Play Store and Galaxy Store section.



      Figure 6: Selecting the delivery type for asset groups

      In the "Addressables Groups" dialog box, select Build > New Build > Play Asset Delivery. Now, the game's addressable-asset configuration is complete. Each asset assigned to an addressable group is packed into an asset pack for that group and the asset pack can be downloaded separately using PAD. Note that asset packs can only be downloaded separately from the Play Store if their delivery type is "On Demand" or "Fast Follow."
      Loading and using the addressable assets with AssetReference
      This section provides a script which details how to load the addressable assets that were implemented with PAD in the earlier sections. Your game is set up to load the addressable assets efficiently. If an asset has not been downloaded yet, the game automatically attempts to download it as an "On Demand" asset using PAD before it loads into the game.
      To complete this setup, use the AssetReference type in your game. This feature enables you to manage and edit addressable assets dynamically at runtime, which gives you more flexibility and control over the assets that your game uses.
      To use two game addressable assets in your script, follow these steps:
      Create two AssetReference instances for the floor types (grass and ground) that you added in the previous section. Add the SerializeField attribute to these AssetReference instances. This enables setting up the assets directly from the Unity editor: [SerializeField] AssetReference Grass_mat; [SerializeField] AssetReference Ground_mat; In the Unity editor, drag and drop the grass and ground assets into the fields in the GameObject script section. Now the AssetReferences specifically reference these two assets during runtime.
      Downloading assets during runtime is necessary for PAD. Use AsyncOperations to load these assets:
      Grass_mat.LoadAssetAsync<Material>().Completed += OnGrassAssetLoaded; Ground_mat.LoadAssetAsync<Material>().Completed += OnGroundAssetLoaded; The OnGrassAssetLoaded and OnGroundAssetLoaded handler functions are defined to use the loaded assets. The LoadAssetAsync method passes the asset using an AsyncOperationHandle, and from there you can access the asset itself using the AsyncOperationHandle.Result parameter.
      In this game, we are using PAD to load the grass and ground assets. Once they are successfully loaded, you can change the floor tile material using the following handler functions.
      In this example, after loading the grass and ground assets, you apply the material change to all the floor tiles in the level:
      void OnGroundAssetLoaded(AsyncOperationHandle<Material> handle) { groundMaterial = handle.Result; foreach (GameObject prefab in floorPrefabs) { prefab.GetComponent<MeshRenderer>().material = groundMaterial; } } Save the script and go back to the Unity editor. The new materials are loaded and applied to the floor tiles in the level.

      Testing your PAD-enabled game on the Play Store and Galaxy Store
      The game configuration for using addressable assets and PAD is complete. Before publishing your game, consider whether to use the "Split Application Binary" option.
      On the Android Player settings, expand "Publishing Settings," and scroll down to the "Split Application Binary" checkbox. This checkbox decides how Unity handles packaging when building the game. If this checkbox is checked, Unity splits the base game files from the asset files when building the AAB and enables you to configure each PAD feature in your game. In the images below, you can see what happens when you choose this option. If this option is unchecked, Unity always generates a singular archive file and disables PAD. This is the safest option for uploading your game to Galaxy Store, if your PAD configuration is using options that are not supported by Galaxy Store.



      Figure 7: "Split Application Binary" option

      To enable PAD, check the "Split Application Binary" option Build the game and upload the generated AAB file to both the Play Store and Galaxy Store to check how the game behaves in both stores. If the game assets load correctly in both stores, the PAD configuration was done correctly. Below is an example of what might happen if "On Demand" configuration is used instead.
      When the game is downloaded from the Play Store, Unity automatically downloads the "On Demand" assets. A notification for an "Additional file download" appears during the download process:




      Figure 8: Additional file download notification

      Once the download is complete, the downloaded asset is loaded in your game, replacing the previous assets. In this example game case, the old ground and grass materials are changed to the new textures configured in the previous section.




      Figure 9: Assets updated in the game

      However, when the same game AAB file is uploaded to Galaxy Store and a user downloads it from this store, the PAD assets are not downloaded. Thus, when the game tries to use these assets, they cannot be loaded into the game's memory and glitches might appear.
      While additional error checking can be done to avoid these glitches, the functionalities which require PAD assets still cannot be used. Internally, the game checks the installation source before trying to download the PAD assets and throws an error if the game is not installed from the Play Store.




      Figure 10: Issues might occur if a PAD-enabled game is uploaded to Galaxy Store

      Making the game compatible with Galaxy Store
      To upload your game to Galaxy Store, you can adjust the asset handling to be compatible with Galaxy Store. The best way to do this is by bundling the assets together with the base game, as explained in the previous sections.
      This method is highly recommended. This ensures that the required assets are always available with the game, as well as allowing you to change the assets during runtime, if necessary. Though this can increase the game download size and require you to upload a separate AAB file to Galaxy Store, the process ensures that the assets are always available with the game for full feature parity across all storefronts.
      To make your game build compatible with all storefronts, choose one of the following approaches.
      Option 1: Uncheck the "Split Application Binary" checkbox
      Go to Build Settings > Player Settings > Publishing Settings and uncheck the Split Application Binary checkbox. When you then compile the game, the new AAB file is compatible with Galaxy Store and all the game's functionalities remain intact.




      Figure 11: "Split Application Binary" unchecked option.

      With this option, the assets are packaged together with the game and no separate download is required.
      Option 2: Change delivery type to "Install Time"
      If you want to keep using PAD, you can achieve compatibility by changing all addressable asset groups' delivery type to "Install Time." Keep in mind that when choosing this option, all assets need to be changed to "Install Time" one by one, while the previous one is a one-click process. Unlike "On Demand" and "Fast Follow" asset packs, "Install Time" asset packs are included in the universal APK. Thus, the assets are downloaded together with the game and work as intended without causing errors.
      From the user's perspective, the main difference between "Install Time" and other PAD options is whether the assets are downloaded when the game is installed or later during gameplay. The initial download size is larger when the assets are packaged together with the game, but on the other hand, the user will not need to wait for the assets to download later during gameplay. This enables offline gameplay as well.
      Conclusion
      In this tutorial, you have learned how to configure a Unity game with PAD so that it can easily be published to Galaxy Store without requiring massive changes or breaking any compatibility. For more information, check out the "Addressables for Android" package documentation page Build content for Play Asset Delivery. If you have any feedback or questions, reach out to us in the Samsung Developers Forum.
      View the full blog at its source
    • By Samsung Newsroom
      Samsung Galaxy Fold devices have taken the mobile industry by storm, offering users a revolutionary way to interact with their applications. One of their key features is the rear display mode that enables users to continue their tasks seamlessly on the cover display while the main display remains turned off. Jetpack WindowManager has introduced APIs to enable this mode programmatically, and starting from One UI 6.0, developers can now utilize these APIs to integrate rear display mode into their applications, enhancing usability and maximizing the potential of foldable devices.
      In this blog post, we dive deeper into implementing Jetpack WindowManager's rear display mode in a camera application. By leveraging this mode, users can take selfies with superior image quality using the rear camera instead of the front camera. Join us as we explore the exciting possibilities of foldable technology and uncover how to optimize your applications for the Samsung Galaxy Fold.
      You can download the sample camera application here.
      CameraXApp.zip (623.3 KB) Sep 26, 2024 Step 1: Add the WindowManager library into the project
      WindowManager, a Jetpack library introduced by Google, supports rear display mode starting from version 1.2.0-beta03. To add the WindowManager library, go to Gradle Scripts > build.gradle (Module: app) and enter the following to the dependencies block:
      implementation "androidx.window:window:1.3.0" Step 2: Implement the WindowAreaSessionCallback interface in MainActivity.kt
      The WindowAreaSessionCallback interface updates an Activity about when the WindowAreaSession is started and ended. Using the onSessionStarted method, this interface provides the current WindowAreaSession as soon as a new window session is started.
      class MainActivity : AppCompatActivity() , WindowAreaSessionCallback { … override fun onSessionEnded(t: Throwable?) { if(t != null) { println("Something was broken: ${t.message}") } } override fun onSessionStarted(session: WindowAreaSession) { } } Step 3: Declare variables
      The WindowAreaController provides information about the moving windows between the cover display and the main display of the Galaxy Fold device.
      The WindowAreaSession interface provides an active window session in the onSessionStarted method.
      WindowAreaInfo represents the current state of a window area. It provides a token which is used later to activate rear display mode.
      WindowAreaCapability.Status represents the availability and capability status of the window area defined by the WindowAreaInfo object. We utilize this status to change the UI of our application. The status of the Galaxy Fold device can be one of the following:
      WINDOW_AREA_STATUS_ACTIVE: if the cover display is currently active.
      WINDOW_AREA_STATUS_AVAILABLE: if the cover display is available to be enabled.
      WINDOW_AREA_STATUS_UNAVAILABLE: if the cover display is currently not available to be enabled.
      WINDOW_AREA_STATUS_UNSUPPORTED: if the Galaxy Fold device is running on Android 13 or lower.
      private lateinit var windowAreaController: WindowAreaController private var windowAreaSession: WindowAreaSession? = null private var windowAreaInfo: WindowAreaInfo? = null private var capabilityStatus: WindowAreaCapability.Status = WindowAreaCapability.Status.WINDOW_AREA_STATUS_UNSUPPORTED private val operation = WindowAreaCapability.Operation.OPERATION_TRANSFER_ACTIVITY_TO_AREA Step 4: Create an instance of WindowAreaController in the onCreate method
      windowAreaController = WindowAreaController.getOrCreate() Step 5: Set up a flow to get information from WindowAreaController
      In the onCreate() method, add a lifecycle-aware coroutine to query the list of available WindowAreaInfo objects and their status. The coroutine executes each time the lifecycle starts.
      lifecycleScope.launch(Dispatchers.Main) { lifecycle.repeatOnLifecycle(Lifecycle.State.STARTED) { windowAreaController.windowAreaInfos .map { info -> info.firstOrNull { it.type == WindowAreaInfo.Type.TYPE_REAR_FACING } } .onEach { info -> windowAreaInfo = info } .map { it?.getCapability(operation)?.status ?: WindowAreaCapability.Status.WINDOW_AREA_STATUS_UNSUPPORTED } .distinctUntilChanged() .collect { capabilityStatus = it updateUI() } } } Step 6: Update the UI according to the device's WindowAreaCapability.Status
      private fun updateUI() { if(windowAreaSession != null) { viewBinding.switchScreenButton.isEnabled = true } else { when(capabilityStatus) { WindowAreaCapability.Status.WINDOW_AREA_STATUS_UNSUPPORTED -> { viewBinding.switchScreenButton.isEnabled = false Toast.makeText(baseContext, "RearDisplay is not supported on this device", Toast.LENGTH_SHORT).show() } WindowAreaCapability.Status.WINDOW_AREA_STATUS_UNAVAILABLE -> { viewBinding.switchScreenButton.isEnabled = false Toast.makeText(baseContext, "RearDisplay is not currently available", Toast.LENGTH_SHORT).show() } WindowAreaCapability.Status.WINDOW_AREA_STATUS_AVAILABLE -> { viewBinding.switchScreenButton.isEnabled = true } WindowAreaCapability.Status.WINDOW_AREA_STATUS_ACTIVE -> { viewBinding.switchScreenButton.isEnabled = true Toast.makeText(baseContext, "RearDisplay is currently active", Toast.LENGTH_SHORT).show() } else -> { viewBinding.switchScreenButton.isEnabled = false Toast.makeText(baseContext, "RearDisplay status is unknown", Toast.LENGTH_SHORT).show() } } } } Step 7: Toggle to rear display mode with WindowAreaController
      Close the session if it is already active, otherwise start a transfer session to move the MainActivity to the window area identified by the token.
      While activating rear display mode, the system creates a dialog to request the user’s permission to allow the application to switch screens. This dialog is not customizable.
      private fun toggleRearDisplayMode() { if(capabilityStatus == WindowAreaCapability.Status.WINDOW_AREA_STATUS_ACTIVE) { if(windowAreaSession == null) { windowAreaSession = windowAreaInfo?.getActiveSession( operation ) } windowAreaSession?.close() } else { windowAreaInfo?.token?.let { token -> windowAreaController.transferActivityToWindowArea( token = token, activity = this, executor = displayExecutor, windowAreaSessionCallback = this ) } } } Step 8: Start the camera preview
      Call startCamera() when onSessionStarted is triggered by the WindowAreaSessionCallback interface.
      override fun onSessionStarted(session: WindowAreaSession) { startCamera() } Step 9: Add a button and set a listener to it for activating rear display mode
      <Button android:id="@+id/switch_screen_button" android:layout_width="110dp" android:layout_height="110dp" android:layout_marginStart="50dp" android:elevation="2dp" android:text="@string/switch_screen" app:layout_constraintBottom_toBottomOf="parent" app:layout_constraintBottom_toTopOf="@+id/horizontal_baseline" app:layout_constraintStart_toEndOf="@id/vertical_centerline" /> viewBinding.switchScreenButton.setOnClickListener{ updateUI() toggleRearDisplayMode() } Incorporating rear display mode into your application can significantly enhance user experience by providing more intuitive control and greater flexibility. By following the outlined steps, you can create a more dynamic and user-friendly interface. As technology continues to evolve, staying ahead with features like rear display mode can set your application apart and offer users a seamless, professional-quality experience. To learn more about developing applications for Galaxy Foldable devices, visit: developer.samsung.com/galaxy-z.
      View the full blog at its source





×
×
  • Create New...