-
Similar Topics
-
By Scott Nebraska
I have a un75mu8000fxza television and it now continually has the one connect patch cord image on the screen. I have plugged and unplugged the one connect cable multiple times to only have the screen return to the cable image. No matter what i push on the remote I am unable to change anything, is the one connect box being disconnected completely disable this television? We primarily use the streaming services, is there a setting in the technicians settings that would allow me to bypass the one connect box for now. I have a cable replacement on order, but could the problem also be with either the television or the one connect box?Â
-
-
By vitt
Hello everyone,Â
I am writing here due to some communication issues between a Samsung Galaxy Watch and my personal computer. I have developed an application (on TizenStudio) that detects heart rate (HR) and heart rate variability (HRV) data. Moreover, the application is programmed so that the HR and HRV data can be sent to any device with an IP address through websocket protocol. So, in my specific case these data are sent to my PC.
This application has worked up to 2 days ago. Indeed, from yesterday the application records data but it does not send them on my PC. I have tried with other computers and also with different internet connections, but nothing is sent. Â
have anyone had a similar problem? Does anyone know how to solve this issue? Do you know if it is a problem of the smartwatch (for instance the operative system) or of TizenStudio?
Your help would be fundamental. Thanks in advance.
My smartwatch is: Galaxy Watch (D61F)Â
One ui watch  version: 2.0Â
Tizen version: 5.5.0.1
Software version: R810XXU1FUD1SM-R810NZKAITV
Â
-
-
By MH77
Hello, I am trying to upload a SS IPTV widget to my Samsung JU6400 Series Smart TV. I have Tizen Studio 2.3 installed on my pc and have tried both TV Extensions 3 & 5xx to no avail. Everything works normally until I try to import the SS IPTV Widget. When I import the widget I select the location that the widget is then go to the next screen and I get as far as to change version of project to >TV and pick > 3.0 then I should be able to tick the project and move forward but am unable to pick>TV and >3.0 the options do no drop down to select, and I can not move forward. I'm reaching out hoping that someone can point me in the right direction. Thanks in advance.😀
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.